Albert,
My bad, I just realized you weren't configuring a serial interface, you were
doing a dial-up (async? isdn?), anyway here is my correction:
(this works with IOS 11.3 or higher) Hope this helps...
interface dialer1
ip address negotiated
------------
For example:
------------
!
ip subnet-zero
chat-script dialout ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 45
CONNECT \c
!
ip nat inside source list 1 interface dialer1 overload
!
interface ethernet0
ip address 192.168.255.1 255.255.255.0
ip nat inside
!
interface async1
no ip address
encap ppp
async mode dedicated
dialer in-band
dialer pool-member 1
ppp authentication chap callin
!
interface dialer1
ip address negotiated
ip nat outside
encap ppp
dialer remote-name ISP
dialer idle-timeout 1200
dialer string nnnnnnn
dialer pool 1
dialer-group 1
no fair-queue
no cdp enable
ppp authentication chap callin
ppp chap hostname xxxxxxx
ppp chap password 0 xxxxxxxx
!
ip classless
ip route 0.0.0.0 0.0.0.0 dialer1
no ip http server
access-list 1 permit 192.168.255.0 0.0.0.255
dialer-list 1 protocol ip permit
!
line aux 0
script dialer dialout
modem inout
modem autoconfigure discovery
transport input telnet
stopbits 1
speed 115200 (or 38400 on c2500)
flowcontrol hardware
!
line vty 0 4
access-class 1 in
transport input telnet
transport output none
password
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7694&t=7555
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
