on the 6509, count your port placement on the physical connection to the
cable (i.e. shelf 2/ port 1 would be 2/1). Go to the enable mode & type
#Set VLAN ? As long as you know your cabling, the rest is pretty intuitive
from here. The switch writes everything to memory, so there is no Copy Run
Star. To check your work, use the Sho VLAN
Phil
----- Original Message -----
From: Michael Oaks
To:
Sent: Friday, June 08, 2001 11:59 AM
Subject: 6509 VLAN [7:7744]
> I am trying to configure a VLAN between a 6509 and a 2980. I'm pretty
> sure I can get the 2980 part done ok, but I have never used a 6509.
> Could someone give me some proceedures on configuring this VLAN.
>
> Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7748&t=7744
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
