One of the things I learned in last week's SNAM class was that you could
configure APPN on routers to test your DLSw and RSRB configs. The idea is
that if the APPN nodes can talk, then your configs are corrrect. However, I
just haven't been able to get the routers to speak to each other and I think
I'm missing something minor. Using the example in our books as a guide,
someone in class was able to get it working but I have yet to make it work
and I'm searching for answers. Below are my configs:
Router One (initiates the connection):
hostname R1
!
source-bridge ring-group 100
dlsw local-peer peer-id 10.100.1.1
dlsw remote-peer 0 tcp 10.200.1.1
!
interface Loopback0
ip address 10.100.1.1 255.255.255.0
logging event subif-link-status
!
interface Serial0
ip address 10.10.10.1 255.255.255.0
logging event subif-link-status
no fair-queue
clockrate 250000
!
appn control-point NETA.R1
complete
!
appn port VDLC vdlc
vdlc 100 vmac 4000.1000.0001
complete
!
appn link-station R2
port VDLC
complete
!
appn routing
router eigrp 1
network 10.0.0.0
!
Router Two:
hostname R2
!
!
source-bridge ring-group 100
dlsw local-peer peer-id 10.200.1.1
dlsw remote-peer 0 tcp 10.100.1.1
!
interface Loopback0
ip address 10.200.1.1 255.255.255.0
logging event subif-link-status
!
interface Serial0
ip address 10.10.10.2 255.255.255.0
logging event subif-link-status
no fair-queue
!
appn control-point NETA.R2
complete
!
appn port VDLC vdlc
vdlc 100 vmac 4000.2000.0002
complete
!
appn routing
router eigrp 1
network 10.0.0.0
!
>From Router One, here is what I see:
R1#sho dlsw peer
Peers: state pkts_rx pkts_tx type drops ckts TCP
uptime
TCP 10.200.1.1 CONNECT 13 13 conf 0 0 0
00:05:59
R1#appn start link R2
R1#
%APPN-6-APPNSENDMSG: Link Station R2 stopped: UNKNOWN_SAP
R1#
And that's where it ends. The idea is that if the output of show appn
session shows the session is active, then the rest of the config is working.
Any ideas from you APPN gurus? :-)
Thanks,
John
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7878&t=7878
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
