Hi all,
I read about extending a frame relay switch by using a tunnel over the
ethernet link. So I could have 2 routers joined up to make one frame relay
switch.
My routers are not accepting the command to route dlci over the tunnel
interface, but ok on serial.
tunnel interface is configured and up/up
int ser0
encapsulation frame-relay
frame-relay intf-type dce
clockrate 64000
frame-relay lmi-type ansi
frame-relay route 100 interface serial 1 200 - works ok
frame-relay route 500 interface tunnel 0 600 - This is rejected, doesn't
recognise tunnel.
I have tried different platforms, 3600/2600/2500/1700 etc.
and different IOS releases, 10-12
I saw this config in a doc called "resource guide for building a CCIE Lab".
The router was a 2501 running 11.3 so I don't understand why it will not
work for me.
Any hints would be appreciated.
Rashid Lohiya
[EMAIL PROTECTED]
020 8509 2990
07785 362626
www.pioneer-computers.com
London UK
Free Cisco Certification links - www.angelfire.com/home/rashidl
--
Rashid Lohiya
[EMAIL PROTECTED]
020 8509 2990
07785 362626
www.pioneer-computers.com
London UK
Free Cisco Certification links - www.angelfire.com/home/rashidl
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7883&t=7883
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
