I don't think Chris' was asking how to configure OSPF for point-to-point but
rather why.
>From my experience, you can use it for when you don't want to subnet each
network and you can save IP Address by going to a multipoint network using
unnumbered interface on the nodes that connect to the frame cloud
""Choi, Howard CW"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> interface serial 0
> no ip address
> encapsulation frame-relay
>
> interface serial 0.1 point-to-point
> ip address x.x.x.x x.x.x.x
> ip ospf network point-to-point
> Howard Choi
> CCNP, CCDP
> ----------
> From: Burnham, Chris
> To: [EMAIL PROTECTED]
> Subject: OSPF over NBMA [7:7941]
> Date: Monday, June 11, 2001 4:30PM
>
> Whenever reading about OSPF there seems to be a great deal of emphasis on
> NBMA in a multipoint enviroment.
> Why would you want to implement mulipoint when you could uses point to
point
> between remote offices connecting back to area0 ??
>
> Chris Burnham,
> Systems Engineer,
> Delphis Consulting Plc.
> Tel: +(44) 020 7916 0200
> Mob: +(44) 07799403576
> [EMAIL PROTECTED]
>
>
> This e-mail and any files transmitted with it are intended solely for the
> addressee and are confidential. They may also be legally privileged.
> Copyright in them is reserved by Delphis Consulting PLC ["Delphis"] and
they
> must not be disclosed to, or used by, anyone other than the addressee. If
> you have received this e-mail and any accompanying files in error, you may
> not copy, publish or use them in any way and you should delete them from
> your system and notify us immediately.E-mails are not secure. Delphis
does
> not accept responsibility for changes to e-mails that occur after they
have
> been sent. Any opinions expressed in this e-mail may be personal to the
> author and may not necessarily reflect the opinions of Delphis.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7955&t=7941
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
