Is a tool that runs on top of Linux for doing just this. Although it most
likely will be easiest to do via Ethernet interfaces.
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
----- Original Message -----
From: "Rashid Lohiya"
To:
Sent: Saturday, June 09, 2001 7:46 PM
Subject: Re: How to create latency? [7:7313]
> Do you thing I could a similare thing with a LAN Analyzer, generating a
> whole load of traffic and directing it over the serial link.
> I haven't tried this, just wondering.
> If I overloaded the link in this way, I would expect packet drops and
> retransmissions, hence I would expect some latency in my applications.
>
> I could be wrong here. Let me know your thoughts
>
> Rashid Lohiya
> [EMAIL PROTECTED]
> 020 8509 2990
> 07785 362626
> www.pioneer-computers.com
> London UK
>
>
> "David C Prall" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I used an Adtech SX12 to do exactly this. A little more expensive then
> > back-to-back cables. But well worth the cost if you need to put together
> new
> > applications to run over low bandwidth satellite links.
> >
> > FXS to FXS VoIP via a 350ms Delayed link worked wonderfully.
> >
> > David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
> > ----- Original Message -----
> > From: "Alex Collins"
> > To:
> > Sent: Wednesday, June 06, 2001 6:12 AM
> > Subject: How to create latency? [7:7313]
> >
> >
> > > Anyone know of a cheap way to generate latency over a back to back
2621
> > > serial configuration?
> > > I would like to test the effect of controllable latency on some apps
> > without
> > > having to stick a box a thousand miles away.
> > >
> > > Makes a change to actually request latency in a network anyway!
> > > Alex.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7960&t=7313
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
