RIP and IGRP only maintain the routing table. I don't believe any other
table/database is used.

CM

> -----Original Message-----
> From: Lupi, Guy [mailto:[EMAIL PROTECTED]]
> Sent: 11 June 2001 15:55
> To: [EMAIL PROTECTED]
> Subject: RE: IGRP [7:7966]
> 
> 
> I know that the RIB is sent on a regular basis, but even RIP 
> has a "show ip
> rip database" that will show you routes that the router has 
> seen but did not
> install in the table.  I am looking for a command that will 
> do something
> similar to this.  I cannot find one in any documentation that 
> I have, I was
> hoping that someone else has also encountered this.  It is 
> very possible
> that the command does not exist, but I was hoping that is not 
> the case.
> 
> -----Original Message-----
> From: Philip Barker [mailto:[EMAIL PROTECTED]]
> Sent: Monday, June 11, 2001 10:19 AM
> To: Lupi, Guy; [EMAIL PROTECTED]
> Subject: Re: IGRP [7:7966]
> 
> 
> IGRP is a distance vector routing protocol whereby the RIB is 
> sent on a
> regular basis.
> There isn't a database to my knowledge as you find with OSPF 
> and EIGRP.
> 
> Phil.
> ----- Original Message -----
> From: "Lupi, Guy" 
> To: 
> Sent: Monday, June 11, 2001 2:03 PM
> Subject: IGRP [7:7966]
> 
> 
> > I set up IGRP in a lab this weekend, studying up on the 
> earlier protocols.
> > What I need to know is, how would I go about seeing all the 
> routes in the
> > database so I can determine what routes the router is 
> seeing in addition
> to
> > what is in the routing table?  I could not find a "show ip 
> igrp database"
> or
> > anything similar.  I ended up having to set the variance to 
> the maximum
> > (128), looking at all the routes and their corresponding 
> metrics, and then
> > setting the variance command again to install only those 
> routes I wanted.
> > Thanks in advance for any help.




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8010&t=7966
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to