Gary,
To ping through the PIX firewall make sure you have the "conduit permit icmp
any any"
applied (or if you have a newer PIX OS you can use the "access-list"
command).
See
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v50/config/config.htm
-Jonathan
Gary Crouch wrote:
> we have servers hosted at a ISP and have a back port connection
> and would like to give a client access thur our back port using one of our
> external IP address I have configure a static address translation for the
> external ip address
> and added a route for the internal address I can pig the internal address
> from the PIX
> but can not ping the server with the external address from outside.
> does the static and conduit commands work when there is a router between
the
> server?
> is there a way to make this work?
>
> Thanks for your help
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8040&t=8031
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
