I think I have a backlog of incoming mail at the moment, so you may already
have an answer to this. But hey, here's another one.
Here's a link on congestion management in general...
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/qcprt2/qcdconmg.htm#1001287
And here's what it says about priority queueing in particular...
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/qcprt2/qcdconmg.htm#xtocid2391237
For the actual commands to use, and their syntax, check out this link...
this points to the priority-group command, but you will also need to
configure a priority-list - the syntax of that is down a bit further.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_r/qrdcmd3.htm#1036155
These links are for IOS 12.1, but there are similar links for other IOS
versions (and I don't think the actual commands have changed).
A search of 'priority queueing' on CCO will get you lots of other links
about it.
Hope that helps...
JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 13/06/2001
09:00 am ---------------------------
"Chetan" @groupstudy.com on 13/06/2001 12:51:50 am
Please respond to "Chetan"
Sent by: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: Configuring Priority and Class based on traffic type. [7:8166]
Hi,
I have a CISCO 2503 and connected to a 64K frame relay link
carrying
all types of data. So i want to prioritize important traffic. I found out
a
simple method would be to classify data in classes and then set priority to
calsses.
Can anybody give me more information on this or links to any
documetns which wi;ll help me do this.
Thanks,
Chetan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8263&t=8166
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
