That was my mistake. It is +9 on the Routers and 9@ on the Call Manager. I just wish the two products used the same configurations. David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com ----- Original Message ----- From: "Ron Carithers" To: "'Dotun Oni'" ; Cc: Sent: Wednesday, June 13, 2001 3:09 PM Subject: RE: VOIP destination-pattern > 9@ does not work on AS5300s anyway. > > -----Original Message----- > From: Dotun Oni [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, June 12, 2001 7:58 PM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: Re: VOIP destination-pattern > > I thought the 9.@ syntax was only for dial plan configuration on the Call > manager. > Are you sure it also works on the dial-peer config. on the router? > > > >From: "David C Prall" > >Reply-To: "David C Prall" > >To: "CCIE Lab groupstudy.com" > >Subject: Re: VOIP destination-pattern > >Date: Tue, 12 Jun 2001 20:10:37 -0400 > > > >9@ > >9.@ adds a little safety > >9T will wait a given amount of time for all digits to be dialed > > > >David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com > >----- Original Message ----- > >From: "Dotun Oni" > >To: > >Sent: Tuesday, June 12, 2001 4:52 PM > >Subject: VOIP destination-pattern > > > > > > > What is the best way to include the following destination-patterns in a > > > dial-peer statement using pattern matching. > > > > > > 91800....... > > > 91877....... > > > 91888....... > > > 9411 > > > 90 > > > 91....... > > > > > > > > > > > > I know I can use > > > > > > dial-peer 1 pots > > > destination-pattern 91800....... > > > port 1/1/0 > > > > > > dial-peer 1 pots > > > destination-pattern 91877....... > > > port 1/1/0 > > > > > > ! > > > ! > > > ! > > > ! > > > > > > etc > > > > > > I am just wondering if there is a way to use one statement to accomplish > > > this instead of listing them separately. > > > > > > > > > Thank > > > _________________________________________________________________ > > > Get your FREE download of MSN Explorer at http://explorer.msn.com > > > **Please read:http://www.groupstudy.com/list/posting.html > >**Please read:http://www.groupstudy.com/list/posting.html > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com > **Please read:http://www.groupstudy.com/list/posting.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8459&t=8459 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
