A router/Switch supports up to X simultaneous telnet sessions. If you were
using a switch/router as a telnet gateway, and you want to make sure that if
all of the ports are taken up you can get access to the network you would
set the password for the last vty (line vty X) to be different than the
rest. Anyone have any other examples?
-----Original Message-----
From: khramov [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 14, 2001 4:56 PM
To: Hire, Ejay
Subject: Re: Switch 2924 [7:8613]
Thanks,
but why would you want to set telnet to vty 0 4, for example, what would be
the difference between that and lets say vty 5 15?
"Hire, Ejay" wrote:
Ip http-server uses the enable password, the vty password is for telnet
access. This is the desired behavior
-----Original Message-----
From: khramov [ mailto:[EMAIL PROTECTED]
]
Sent: Thursday, June 14, 2001 4:26 PM
To: [EMAIL PROTECTED]
Subject: Switch 2924 [7:8613]
I am configuring 2924 and I am trying to set a password for http.
I did:
line vty 5 15
password ******,
However, instead of the password that I typed in, it uses my enable
password to log into the switch through http. What am I doing wrong?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8629&t=8613
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
