Scott
you need the telephone number after your bri0/0
isdn call int bri0/0 234234234
to disconnet the call type
isdn dis int bri0/0 all
-----Original Message-----
From: STRAND Scott [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 13, 2001 4:47 PM
To: [EMAIL PROTECTED]
Subject: ISDN call Command [7:8351]
I need to test if the bri interface used for DDR works without taking the
serial interface down. (Don't ask me why, the reasons are
political). So basically, I just want to see if it works. I've done the "sh
isdn status" to check level 1 & 2 but is it possible to
bring up an interface in this situation? How does the:
isdn call int bri0/0
command work? I tried this with no luck.
Thanks,
Scott
***>
=========================================================================
THE INFORMATION IN THIS E-MAIL AND IN ANY ATTACHMENTS IS CONFIDENTIAL
AND MAY BE PRIVILEGED. IF YOU ARE NOT THE INTENDED RECIPIENT, PLEASE
DESTROY THIS MESSAGE AND NOTIFY THE SENDER IMMEDIATELY. YOU SHOULD NOT
RETAIN, COPY OR USE THIS E-MAIL FOR ANY PURPOSE, NOR DISCLOSE ALL OR
ANY PART OF ITS CONTENTS TO ANY OTHER PERSON.
ANY VIEWS EXPRESSED IN THIS MESSAGE ARE THOSE OF THE INDIVIDUAL SENDER,
EXCEPT WHERE THE SENDER SPECIFICALLY STATES THEM TO BE THE VIEWS OF
LLOYD'S.
LLOYD'S MAY MONITOR THE CONTENT OF E-MAILS SENT AND RECEIVED VIA ITS
NETWORK FOR VIRUSES OR UNAUTHORISED USE AND FOR OTHER LAWFUL BUSINESS
PURPOSES.
mail06
=========================================================================
> ************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8527&t=8351
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
