Are you replacing a 4MB with a 8MB or adding the 8 to an existing 8?
If replacing, a recent thread indicated that just doing a copy tftp flash
would do it. I've gone the long way about this. Change config register to
0x2101 and reloaded to router(boot)> Then done the tftp.
If adding to existing Flash, I've also done it the long way. Go to
router(boot)>. Go to enable. erase both flash sticks - one at a time. Then
no partition flash from config t. Save config. tftp new image.
> -----Original Message-----
> From: Bob Edmonds [mailto:[EMAIL PROTECTED]]
> Sent: Monday, June 18, 2001 9:55 AM
> To: [EMAIL PROTECTED]
> Subject: Memory upgrade: Simple concerns [7:8944]
>
>
> Hi all,
>
> I just purchased 8MB of Flash for a 2501, I was wondering how
> one would go
> about installing it? Is it mere open the router and
> plug&chug? I also am
> going to load a new IOS on it, so should I erease the old IOS
> and then copy
> from the image from the tftp server to the router? Thanks!!!
>
> Bob Edmonds
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8957&t=8944
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
