Thanks Dude- got my virus all quarantined :o)
Phil
----- Original Message -----
From: RamG
To:
Sent: Sunday, June 17, 2001 7:02 PM
Subject: Re: RIP Update [7:8897]
> Thanks Circusnuts. Problem solved. The interface connection was wrong
> between the routers.
>
> By the way can someone clarify on this one - Is it wrong to connect Serial
0
> of Router A to Serial 1 of Router B. I did come across this problem while
> playing on my home lab with rip configuration.
>
> Tx / RamG
>
> ""Circusnuts"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Are you taking into account RIP v1 assumes the only viable subnet mask
is
> > the one on the interface it advertises out of ??? Are you summarizing &
> > does it follow the natural bit boundaries (so as not to advertise a
> > blackhole).
> >
> > Am I close to the issue ???
> >
> > Phil
> > ----- Original Message -----
> > From: RamG
> > To:
> > Sent: Sunday, June 17, 2001 3:20 PM
> > Subject: RIP Update [7:8897]
> >
> >
> > > I was practicing Lab 19 from All In One Study Guide. I did the
> > > configuration exactly as stated but the RIP is not advertising.
> Following
> > > is the debug ip rip & config details. Hope someone can help me.
> > >
> > > 01:12:59: RIP: ignored v1 update from bad source 193.1.1.1 on Serial1
> > > 01:13:13: RIP: ignored v1 update from bad source 152.1.1.1 on
Ethernet0
> > > 01:13:19: RIP: sending v1 update to 255.255.255.255 via Ethernet0
> > > (148.1.1.1)
> > > 01:13:19: RIP: build update entries
> > > 01:13:19: network 10.0.0.0 metric 1
> > > 01:13:19: network 192.1.1.0 metric 1
> > > 01:13:19: RIP: sending v1 update to 255.255.255.255 via Loopback0
> > (10.1.1.1)
> > > 01:13:19: RIP: build update entries
> > > 01:13:19: network 148.1.0.0 metric 1
> > > 01:13:19: network 192.1.1.0 metric 1
> > > 01:13:19: RIP: sending v1 update to 255.255.255.255 via Serial1
> > (192.1.1.1)
> > > 01:13:19: RIP: build update entries
> > > 01:13:19: network 10.0.0.0 metric 1
> > > 01:13:19: network 148.1.0.0 metric 1
> > >
> > > R 2501
> > >
> > > interface Loopback0
> > > ip address 10.1.1.1 255.255.255.0
> > > interface Ethernet0
> > > ip address 148.1.1.1 255.255.255.0
> > > no ip route-cache
> > > no ip mroute-cache
> > > no keepalive
> > > interface Serial1
> > > ip address 192.1.1.1 255.255.255.0
> > > no ip route-cache
> > > no ip mroute-cache
> > > router rip
> > > network 10.0.0.0
> > > network 148.1.0.0
> > > network 192.1.1.0
> > > ip kerberos source-interface any
> > > no ip classless
> > > no ip http server
> > > end
> > >
> > > R 2511
> > >
> > > p host R2503 2003 1.1.1.1
> > > ip host R2504 2004 1.1.1.1
> > > ip host R2502 2002 1.1.1.1
> > > ip host R2501 2001 1.1.1.1
> > > interface Loopback0
> > > ip address 1.1.1.1 255.0.0.0 - This is being used for Terminal Server
> > > interface Serial0
> > > ip address 192.1.1.2 255.255.255.0
> > > no fair-queue
> > > clockrate 64000
> > > interface Serial1
> > > ip address 193.1.1.1 255.255.255.0
> > > no fair-queue
> > > clockrate 64000
> > > router rip
> > > network 192.1.1.0
> > > network 193.1.1.0
> > > ip kerberos source-interface any
> > > no ip classless
> > > no ip http server
> > > end
> > >
> > > R 2503
> > >
> > > interface Ethernet0
> > > ip address 152.1.1.1 255.255.255.0
> > > no keepalive
> > > interface Serial0
> > > ip address 193.1.1.2 255.255.255.0
> > > no ip mroute-cache
> > > no ip address
> > > router rip
> > > network 152.1.0.0
> > > network 193.1.1.0
> > > ip kerberos source-interface any
> > > no ip classless
> > > no ip http server
> > > end
> > >
> > > TIA / RamG
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9001&t=8897
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
