Lee,
Just from your show ver looks like the IOS is not seeing the serial
interfaces. I suggest you upgrade your code.
Raul
----- Original Message -----
From: "Hunt Lee"
To:
Sent: Thursday, June 21, 2001 9:56 AM
Subject: Help!!! [7:9311]
> [ The following text is in the "x-user-defined" character set. ]
> [ Your display is set for the "US-ASCII" character set. ]
> [ Some characters may be displayed incorrectly. ]
>
> I have just bought a Cisco 2503 router from Ebay. However, after I boot
> up the router, I only see the following 2 interfaces:
>
> Router>show ip int brief
> Interface IP-Address OK? Method Status
> Protocol
> BRI0 unassigned YES not set administratively down
> down
> Ethernet0 unassigned YES not set administratively down
> down
> Router>
>
> But I can't find the Serial interfaces. I tried swapping out the DRAM
> and Flash, but the same thing happen. Please help. Another thing I
> noticed when the router boots up:
>
> F3: 3343908+79112+202788 at 0x3000060 show flash
>
> System flash directory:
> File Length Name/status
> 1 3423052 igs-g-l.110-9
> [3423116 bytes used, 771188 available, 4194304 total]
> 4096K bytes of processor board System flash (Read ONLY)
>
> And when i do show ver, it's not even showing up??
>
> Processor board ID 02996147, with hardware revision 00000000
> Bridging software.
> Basic Rate ISDN software, Version 1.0.
> 1 Ethernet/IEEE 802.3 interface.
> 1 ISDN Basic Rate interface.
> 32K bytes of non-volatile configuration memory.
> 4096K bytes of processor board System flash (Read ONLY)
>
> Configuration register is 0x2102
>
>
> Regards,
> Hunt Lee
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9319&t=9311
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
