According to the Cisco Error message detector,
1. %DEC21140-5-NOCARR: [chars] cable/connector problem? Help us help you.
The Fast Ethernet port did not find a carrier when preparing to send a
packet. This means that it is no longer receiving signals from the LAN. This
problem can be caused by disconnected Fast Ethernet cabling or a transceiver
failure.
Recommended Action: Check the Fast Ethernet wiring and the port adapter. If
the message recurs, copy the error message exactly as it appears on the
console or in the system log, call your Cisco technical support
representative, and provide the representative with the gathered
information.
Related documents: No specific documents apply to this error message.
The Cisco Error Message Decoder is the Cisco equivalent of the magic 8 ball.
It can be found at:
http://www.cisco.com/support/Errordecoder/error-decoder.html
Good Luck,
Ejay
-----Original Message-----
From: John McCartney [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 21, 2001 4:20 PM
To: [EMAIL PROTECTED]
Subject: Port config problem [7:9415]
Hello all I have two routers 7507 and 7207 that are giving me the same error
message on the FastEthernet ports and can't figure out what it's trying to
tell me. Anybody have any ideas on how to fix it, any help is appreciated.
Error Message
%DEC21140-5-NOCARR: [chars] cable/connector problem?
John
CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9427&t=9415
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
