I think ip load-sharing per-packet command only work on serial port.
Since it is "IP" load sharing, it should only work on layer 3 interface.
You can implement Ethernet load sharing by " FastEther Channel (
FEC). How does FEC choose a way to go? It calculate the XOR
between the destination MAC address and port MAC address.
Todd
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Andy Barkl
Sent: Saturday, June 23, 2001 9:59 PM
To: [EMAIL PROTECTED]
Subject: Load balancing [7:9627]
I am trying to configure load balancing across two FT1s that connect into a
3620's Ethernet ports.
I have enabled IP load-sharing per-packet on each interface but it doesn't
seem to help.
I have also removed the 512K link and nothing changes regardless of the
load-sharing statement. But when I pull the 128K link, all connectivity is
lost.
I am thinking there is a problem with the 512K link and I have asked the
client to contact the provider.
My question is, will the IP load-sharing per-packet command work across the
Ethernet ports, or does it only apply to Serial ports?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9661&t=9627
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
