If the "ip address negotiated" command is left on the BRI it will still work using dialer interfaces. Try it for yourself. Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640 5G Networks, Inc. [EMAIL PROTECTED] > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > SilCam > Sent: Monday, June 25, 2001 4:02 AM > To: [EMAIL PROTECTED] > Subject: Re: I can't use dialer 1 int to connect internet [7:9662] > > > you also need to configure "no ip address" under the BRI interface. > > "Brian Dennis" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Try using "dialer pool 1" under the dialer interface and "dialer > pool-member > > 1" under the BRI interface(s). > > > > Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640 > > 5G Networks, Inc. > > [EMAIL PROTECTED] > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > > hwen > > > Sent: Saturday, June 23, 2001 8:50 PM > > > To: [EMAIL PROTECTED] > > > Subject: I can't use dialer 1 int to connect internet [7:9662] > > > > > > > > > Hi, > > > when I only config the bri int , I can ping any ip in route. > > > Now, I use the dialer 1 int, I can't ping any ip in route > > > > > > my config > > > > > > version 12.0 > > > service timestamps debug uptime > > > service timestamps log uptime > > > no service password-encryption > > > ! > > > hostname 2600 > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ip subnet-zero > > > no ip domain-lookup > > > ! > > > isdn switch-type basic-net3 > > > isdn voice-call-failure 0 > > > ! > > > ! > > > ! > > > interface FastEthernet0/0 > > > ip address 192.168.1.250 255.255.255.0 > > > no ip directed-broadcast > > > ip nat inside > > > duplex auto > > > speed auto > > > ! > > > interface BRI1/0 > > > ip address negotiated > > > no ip directed-broadcast > > > ip nat outside > > > encapsulation ppp > > > dialer rotary-group 1 > > > dialer-group 1 > > > isdn switch-type basic-net3 > > > ! > > > interface BRI1/1 > > > no ip address > > > no ip directed-broadcast > > > ip nat outside > > > encapsulation ppp > > > shutdown > > > dialer rotary-group 1 > > > isdn switch-type basic-net3 > > > ! > > > interface BRI1/2 > > > no ip address > > > no ip directed-broadcast > > > shutdown > > > isdn switch-type basic-net3 > > > ! > > > interface BRI1/3 > > > no ip address > > > no ip directed-broadcast > > > shutdown > > > isdn switch-type basic-net3 > > > ! > > > interface Dialer1 > > > ip address negotiated > > > no ip directed-broadcast > > > ip nat outside > > > encapsulation ppp > > > dialer in-band > > > dialer idle-timeout 1800 > > > dialer string 169 > > > dialer load-threshold 1 either > > > dialer-group 1 > > > ppp authentication pap callin > > > ppp pap sent-username 169 password 7 055A5056 > > > ppp multilink > > > ! > > > ip classless > > > ip route 0.0.0.0 0.0.0.0 Dialer1 > > > no ip http server > > > ! > > > dialer-list 1 protocol ip permit > > > ! > > > line con 0 > > > transport input none > > > line aux 0 > > > line vty 0 4 > > > login > > > ! > > > no scheduler allocate > > > end > > > > > > > > > when I ping somewhere in route , the message is > > > > > > Sending 5, 100-byte ICMP Echos to 166.111.8.28, timeout is 2 seconds: > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9771&t=9662 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
