... or you could try changing the SID just to see what happens ... there are
utils for that.
YMMV.
Thanks!
TJ
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Saturday, June 23, 2001 09:33
To: [EMAIL PROTECTED]
Subject: Re: Got A Side Job and am baffled by one client......
[7:9612]
George,
I think you just answered your own question. IMHO, if the other PC's have
the sameconfig and are able to get an address, it is most likely a SID that
is gotten corrupt on the box in question. I would back up data, rebuild,
and
readd it to the workgroup.
My .02c,
BTW, if you want to block by MAC address, use an access list # 700 - 799.
Robert Hugo
*****************************************************************************
The information in this email is confidential and may be legally privileged.
It is intended solely for the addressee. Access to this email by anyone else
is unauthorized.
If you are not the intended recipient, any disclosure, copying, distribution
or any action taken or omitted to be taken in reliance on it, is prohibited
and may be unlawful. When addressed to our clients any opinions or advice
contained in this email are subject to the terms and conditions expressed in
the governing KPMG client engagement letter.
*****************************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9963&t=9612
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
