Hi
I have 1 router 7200 currently handeling all my connectivity to the company
backbone. I now want to move existing networks (6 Class C's) off the 7200
and only the new 6509's with MSFC2's.
I have configured the uplinks into the backbone from the 6509, this works
fine, when however I add an IP address onto the vlan 1 interface on my MSFC
and unshut the interface the 7200 starts dropping packets. I am currently
running ospf in area 0 and static routes into my vlan1. I am not advertising
the vlan1 interfaces from the MSFC into OSPF at this time.
At the movement I am grabbing at straws to determine what the problem may
be. any thoughts appreciated even if it is very unlikely to be the problem
as I cant see anything obvious from the configs.
Network diagram as follows
----------[backbone - OSPF0 ]----------------
| | |
[MSFC] ------[MSFC]-----[7200]
| | | (.1 ip set as default
gateway)
| [vlan1] | |
| | |
[2924]--------[2924]--------|
|
|__________[PC]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10077&t=10077
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
