Raul - my apologies...I've been busy with non-email and non-router
activities for the past few days. Now that I'm back...
The method I used only works with a blank configuration (I actually had
priveleged EXEC access by guessing the enable password of cisco)
For a non-blank configuration, the only solution I could propose is cracking
the box and somehow erasing the NVRAM, and someone more knowledgable than me
would have to lead you through that exercise.
-e-
----- Original Message -----
From: Raul F. Fernandez
To:
Sent: Wednesday, June 27, 2001 10:28 PM
Subject: Dead console port [7:10245]
> Dear group,
>
>
> I saw EA Louie's post on how he got into his router which had no config on
> it and a dead console. From reading on the CCO site he seemed to have used
> SLARP to upload config to the router. I found the article on CCO and tried
> to duplicate the feat on a router with a dead console and a config. It did
> not work, any insights? Does the router have to be configless for this to
> work?
>
> Raul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10254&t=10245
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
