"Georgescu, Aurelian" wrote:
> First, it uses SNMP. You can greatly simplify and say it's a GUI that helps
> you use SNMP to manage your CISCO stuff.
> Second, you have to read the manual (no shortcut here, sorry!). You have to
> start by installing "CD One", which is the main server component. Then you
> can add different modules for various platforms, if you purchased them. Pay
> attention to the hardware/software requirements for each module. You will
> find detailed description of each step along the way in each module's
> manual. Then you can use your browser to connect to the server.
>
Thank your for your help.
I have installed all stuff and I have connect via browser.
At this time I have not enough time to read 5 manuals. I'm looking for a
cookbook, where
I find fast-solutions, like
1. look into site X and press button Y and Z and you have a basic
configuration for an
autodiscovery of your network or so
2. ...
Do you understand ?!
Regards, Holger.
--
Holger Eichhorn
IT Administration
CSK - Computer Services Kaisha (Deutschland) GmbH
http://www.csksoftware.com
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10291&t=10266
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
