Thanks Daniel,

I am not that technical in this area yet, but does that mean that I can
connect four 2501's to one 2520 with two 2501's connected to the "same
speed" interfaces, and the other two 2501's to the low speed interfaces?

I was not aware that you could connect a high speed synchronous serial
interface to a low speed synchronous serial interface.

I was thinking about maybe a 2610 with 2 WAN interface cards, each with 2
synchronous ports, but I haven't calculated what that would cost me yet.

Thanks,

Ole

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Ole Drews Jensen
 Systems Network Manager
 CCNA, MCSE, MCP+I
 RWR Enterprises, Inc.
 [EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
 http://www.OleDrews.com/CCNP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 NEED A JOB ???
 http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


-----Original Message-----
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 28, 2001 4:51 PM
To: 'Ole Drews Jensen'; [EMAIL PROTECTED]
Subject: RE: Five-in-one synchronous serial [7:10312]


Consider anything in the 2520-2523 range. They have two sync serial that
will do a max of 2 Mbs but the other ports will do up to 115kbs sync. If you
want all 2Mbs ports then consider a 4500M with a four port serial module.

> -----Original Message-----
> From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, June 28, 2001 3:26 PM
> To: [EMAIL PROTECTED]
> Subject: Five-in-one synchronous serial [7:10312]
> 
> 
> I am looking for a router with 3 or more synchronous serial 
> ports for my
> lab, but all the fixed 2500 models only have a max of two.
> 
> I can see that you can get a five-in-one synchronous serial 
> WAN interface
> card for the 2524 and 2525, but does that mean that I can connect five
> different 2501's (to take an example) to this one port with a 
> special cable?
> 
> Also, would that be the best and/or cheapest solution, or can 
> some of you
> with labs at home throw me a good idea what to look for?
> 
> I need the same kind of synchronous DB60 serial ports as my 
> 2501's/2502's
> have.
> 
> Thanks,
> 
> Ole
> 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  Ole Drews Jensen
>  Systems Network Manager
>  CCNA, MCSE, MCP+I
>  RWR Enterprises, Inc.
>  [EMAIL PROTECTED]
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
>  http://www.OleDrews.com/CCNP
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  NEED A JOB ???
>  http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Report misconduct 
> and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10342&t=10312
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to