Hi,
Where to "bob" and "mick" authenticate?
The USERNAME ***** PASSWORD ****
I don't see them
Teunis
Hobart, Tasmania
Australia
On Thursday, June 28, 2001 at 05:37:49 PM, Bradley J. Wilson wrote:
> I'm not an expert at dial stuff (yet) and don't have a router in front of
> me, but my first thought is: is the router sending the correct SPID? Also,
> which debug script output are we looking at here, and what other debugs
> could you run? Try running both q931 and q921 - that will cover both L3
and
> L2.
>
> BJ
>
>
>
> ----- Original Message -----
> From: Andrew Lawrence
> To: [EMAIL PROTECTED]
> Sent: Thursday, June 28, 2001 3:18 PM
> Subject: 1603 router config - part 2 [7:10304]
>
>
> I've managed to connect 2 1603 routers together up to a fashion but I
> have 2 questions
>
> >From one router I can ping the other router (it dials the number
> connects and then the ping replies)
>
> >From the other router if I ping it dials but gets disconnected, a debug
> shows the following
>
> 01:50:12: BR0 DDR: rotor dialout [priority]
> 01:50:12: BR0 DDR: Dialing cause ip (s=172.30.70.2, d=192.168.10.2)
> 01:50:12: BR0 DDR: Attempting to dial 02077394093
> 01:50:12: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 01:50:12: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
> 01:50:12: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to
> 02077394093
> 01:50:13: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> 01:50:13: DDR: Call disconnected, 1 packets unqueued and discarded
> 01:50:13: BR0 DDR: has total 2 call(s), dial_out 0, dial_in 0
> 01:50:13: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
> 01:50:13: BR0:1 DDR: disconnecting call.
>
> Question 1 Why is it doing this , I haven't really paod much attention
> to authentication, is any going on !
>
> Question 2 If I have PCs on the network with the router that does dial
> out OK and have their default gateway set are they likely to communicate
> with a server on the other side (if that has its gateway set as well)
> i.e is there any other ip type config required on the routers?
>
> TIA
>
> Andy
>
> Here are the 2 router configs (p.s the 172.30.70.x network wasn't one of
> mine !)
>
> Router one - Can't ping other router
>
> Current configuration WH
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> service password-encryption
> hostname Wh
> enable secret 5
> username Router password 7
> ip subnet-zero
> no ip source-route
> isdn switch-type basic-net3
> !
> interface Ethernet0
> ip address 172.30.70.2 255.255.255.0
> no ip directed-broadcast
> no ip proxy-arp
> interface BRI0
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-net3
> no fair-queue
> no cdp enable
> !
> interface Dialer1
> description RCN
> ip unnumbered Ethernet0
> no ip directed-broadcast
> no ip proxy-arp
> encapsulation ppp
> no ip split-horizon
> dialer remote-name Wh
> dialer idle-timeout 300
> dialer string 01220394093
> dialer hold-queue 10
> dialer load-threshold 10 either
> dialer pool 1
> dialer-group 1
> ppp authentication chap
> ppp chap hostname mick
> ppp chap password 7 14041D0D0505242437
> ppp pap sent-username mick password 7 120A0A111B0A020B39
> ppp multilink
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer1
> ip route 192.168.10.0 255.255.255.0 Dialer1
> !
> dialer-list 1 protocol ip permit
> !
> line con 0
> exec-timeout 120 0
> transport input none
> line vty 0 4
> exec-timeout 0 0
> login local
> !
> end
>
> And router 2 - can dial and gets a reply to pings
>
> Current configuration Bow
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> service password-encryption
> !
> hostname Bow
> !
> enable secret 5
> !
> username Router password 7 023
> username Wh password 7 1522
> ip subnet-zero
> no ip source-route
> no ip domain-lookup
> isdn switch-type basic-net3
> !
> interface Ethernet0
> ip address 192.168.10.2 255.255.255.0
> no ip directed-broadcast
> no ip proxy-arp
> !
> interface BRI0
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-net3
> no fair-queue
> ppp authentication chap pap callin
> ppp multilink
> !
> interface Dialer1
> description RCN
> ip unnumbered Ethernet0
> no ip directed-broadcast
> no ip proxy-arp
> encapsulation ppp
> no ip split-horizon
> dialer remote-name bow
> dialer idle-timeout 300
> dialer string 0207224680
> dialer hold-queue 10
> dialer pool 1
> dialer-group 1
> ppp authentication chap
> ppp chap hostname bob
> ppp chap password 7 08264542050A
> ppp pap sent-username bob password 7 07082840421A
> ppp multilink
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer1
> ip route 172.30.70.0 255.255.255.0 Dialer1
> !
> dialer-list 1 protocol ip permit
> !
> line con 0
> exec-timeout 0 0
> transport input none
> line vty 0 4
> exec-timeout 0 0
> login local
> !
> end
--
www.tasmail.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10345&t=10304
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
