I'm hearing of exactly the same thing on an old job of mine where two 2611's
across a T1/E1 link are doing the same. Driving us nuts as same fault
finding has not worked any brains out there!
Karl
----- Original Message -----
From: "Michael Montgomery"
To:
Sent: Friday, June 29, 2001 9:02 PM
Subject: Mapped Drive Dropping Over Cisco WAN [7:10429]
> Does anyone know if there are any possible reasons why mapped drives
across
> a T-1 cisco routed WAN link would drop after appx. 3 minutes? I've tried
> every registry tweak that I could find in the MSKB and nothing has kept
the
> link up for more than a few minutes. It's not just in the application but
> also when you go in My Computer and double-click the drive itself. A
message
> pops up that says it is an unreliable connection. I also tried a cmd on
the
> server net configure server /autodisconnect:-1 which by MS definition will
> prevent the server from idle-disconnect of shared resources or RAS
> connections. As this happens on the 95 and W2K machines I think it's not
> related to the workstations, but I am not sure. So this leads me to
believe
> that maybe there is a timeout or keepalive that needs to be set/adjusted
on
> the router.
>
> Thanks in advance!
>
> Michael
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10432&t=10429
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
