I'm trying to get two 1602's and a couple of 2500's (2524/2501) setup into
some kind of lab. I can't get the 1602's to see each other on the built-in
56k modules. I've tried service-module settings for clock source
line/internal, speed, network-type, but nothing works. I made a cable with
pins 1,2 to 4,5 and that works for the T1 modules that I have in the 1602's
and 2524, but not on the built in 56k (in the 1602's). What am I doing
wrong? Please tell me how I should make my cable or correct config, or
point me to where it is on the CD. Thanks for any help, Dave
---------------------------------
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35 a year!
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10469&t=10469
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
