B4 answering what is going wrong, could you see anything in the RADIUS log? That should give some hints. Gary ""nrf"" I am trying to set up a L2F VPDN, using CiscoSecure for Windows (acting as a > Radius server). I have yet to actually get the VPDN up. > > I believe that the problem has something to do with the Radius configuration > on Ciscosecure. I say this because when I configure it as a Tacacs+ server, > the VPDN settings all work perfectly. This indicates to me that the NAS and > the home gateway are set up correctly, and Ciscosecure is set up correctly, > when using Tacacs+. But when I shift everything to Radius (both the aaa > settings on the router and the network settings on Ciscosecure), all hell > breaks loose. Shift it back to Tacacs+, and everything is fine again. > > So, has anybody ever successfully done a VPDN using Radius (not just > Ciscosecure, but any kind of Radius)? If so, could you just provide a > walkthrough of how to do it - what AV pairs to use, etc.? > > Note, I am not interested in being pointed to a bunch of sample CCO configs, > because I have already read them, and have copied them, and they seem not to > work. I am interested in finding somebody who has actually done a VPDN > w/Radius and can confirm that it works. > > Thanx Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=10551&t=10535 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
