Here is the debug isdn events output from when the 1700 disconnects:
clarendon2-gw#
04:14:10: ISDN BR0: Event: Hangup call to call id 0x801E
04:14:10: ISDN BR0: process_disconnect(): call id 0x801E, call type is DATA,
b_idb 0x809D7DF8, ces 1, cause Normal call clearing(0x10)
04:14:10: %ISDN-6-DISCONNECT: Interface BRI0:2 disconnected from 0353324231
clarendon, call lasted 20 seconds
04:14:49400989532: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x801E
04:14:47244640256: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
04:14:47244640267: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
04:14:49398792589: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x801E
04:14:47244640256: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
Here is the debug isdn events output from the 2611 side of things:
05:12:32225367844: ISDN BR0/1: received HOST_DISCONNECT call_id 0x25
05:12:30064771072: ISDN BR0/1: Event: Call to was hung up.
05:12:32225367716: ISDN BR0/1: process_disc_ack(): call id 0x25, ces 1, call
type DATA
05:12:30906921739: %ISDN-6-DISCONNECT: Interface BRI0/1:2 disconnected from
unknown , call lasted 20 seconds
05:12:32222871552: %LINK-3-UPDOWN: Interface BRI0/1:2, changed state to down
05:12:32222862421: ISDN BR0/1: received HOST_DISCONNECT_ACK call_id 0x25
05:12:30064771072: ISDN BR0/1: HOST_DISCONNECT_ACK: call type is DATA
I am still working on it! Thought it might be the fast-idle timer, so made
it
a large value, to no avail.
Thanks again if anyone can help!
Sam.
----- Original Message -----
From: Sam Deckert
To: [EMAIL PROTECTED]
Sent: Monday, July 02, 2001 3:09 PM
Subject: ISDN B Channel Disconnecting
Hello everyone,
I am having a bit of an ISDN related problem at the moment and was wondering
if anyone is able to help.
I am connecting two sites together via 128k isdn, with one site having a 2611
and the other a 1700.
I have the two sites permanently connected fine with the first B channel,
however whenever I issue the "dialer load-threshold 1 either" command one
each
router to always have the 2nd B channel up, the second B channel connects and
remains connected for 20 seconds exactly before disconnecting. The 1st B
channel remains connected regardless.
I have tried changing the idle-timeout values to no avail, and just cant
figure it out.
I guess it is probably something simple, but just cant work it out.
Here is the BRI config of the 2611:
username clarendon2-gw password 7 094E1B040D0210
!
hostname clarendon
ip subnet-zero
no ip finger
!
ipx routing 0030.854f.c9e0
ipx gns-response-delay 1500
isdn switch-type basic-net3
!
!
interface BRI0/1
ip unnumbered BRI0/0
encapsulation ppp
no ip mroute-cache
dialer idle-timeout 2000000
dialer enable-timeout 5
dialer wait-for-carrier-time 15
dialer map ip xxx.xxx.xxx.xxx name clarendon2-gw broadcast
dialer map ipx FEEDBEEF.0002.1761.29dd name clarendon2-gw broadcast
dialer load-threshold 1 either
dialer-group 1
ipx network FEEDBEEF
no ipx route-cache
ipx watchdog-spoof
isdn switch-type basic-net3
isdn calling-number xxxxxxxx
no fair-queue
compress stac
no cdp enable
ppp authentication chap
ppp multilink
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
no cdp run
Here is the config of the 1700:
hostname clarendon2-gw
!
username clarendon password 7 011153094F0C01
!
!
ipx routing 0002.1761.29dd
ipx gns-response-delay 1500
isdn switch-type basic-net3
!
interface BRI0
ip unnumbered FastEthernet0
encapsulation ppp
dialer idle-timeout 2000000
dialer map ip xxx.xxx.xxx.xxx name clarendon broadcast
dialer load-threshold 1 either
dialer-group 1
ipx network FEEDBEEF
no ipx route-cache
ipx watchdog-spoof
isdn switch-type basic-net3
no fair-queue
compress stac
no cdp enable
ppp authentication chap
ppp multilink
!
ip classless
no ip http server
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
no cdp run
!
no scheduler allocate
end
What do you think??? Any advice, suggestions welcome and most appreciated!
Thanks...
Sam.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10596&t=10596
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
