Make Routes Static & Set Metrics On your routes?
ip route 0.0.0.0 0.0.0.0 ETH1
ip route 0.0.0.0 0.0.0.0 BRI 10
Don't know if this helps any..
D
-----Original Message-----
From: KM Reynolds [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 04, 2001 4:36 PM
To: [EMAIL PROTECTED]
Subject: Directly connected ethernet interface [7:10998]
Hi Everyone,
Need you help.
I have a server that is on a remote LAN. To ping the server, the traffic
goes in the local router(gateway) e0, out e1, to a local Aironet wireless
bridge, to the remote Aironet wireless bridge, to a switch, to server.
Works great.
Currently, there is also a link to the remote site, an ISDN, from the local
router to a remote router. We would like to use this ISDN as a backup to
wireless connection.
The routers are configured to use EIGRP to route between the wireless, and
floating routes are set with higher administrative distance so when the
EIGRP disappears out of the routing table the floating routes route via the
ISDN.
All works, when the ethernet (e1) is shutdown. When I disconnect the
wireless at the remote, the ISDN comes up. The problem is, the route to the
directly connected ethernet LAN is still in the routing table (C
192.168.30.128 255.255.255.128 is directly connected, Ethernet1). So traffic
still flows out of e1, and I guess when it reaches the remote wireless
bridge, it is discarded, that where the connection is down.
Is there anyway around this, is there a way for the e1 to detect the path is
down or is my only option to place a router and segment the wireless bridge
link.
Any help would be great.
Thanks
KM
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
**********************************************************************
The information contained in this message is confidential and
is intended for the addressee(s) only. If you have received
this message in error or there are any problems please notify
the originator immediately. The unauthorised use, disclosure,
copying or alteration of this message is strictly forbidden. This
message and any attachments have been scanned for viruses.
Orbiscom Ltd. will not be liable for direct, special, indirect or
consequential damages arising from alteration of the contents
of this message by a third party or as a result of any virus being
passed on.
www.Orbiscom.com
**************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11001&t=10998
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
