Yes,
enable bridging in global config mode for IEEE
802.1d or DEC and place selected interfaces into a
bridge group.
Phil.
--- "Burnham, Chris"
wrote: > When configuring transparent bridging on a
router ,
> do you have to specify
> one of CRB (Concurrent Routing /Bridging) or
> IRB(Intergrated routing and
> Bridging) .
> My question is can you have just plain old
> transparent bridging
>
> Chris Burnham,
> Systems Engineer,
> Delphis Consulting Plc.
> Tel: +(44) 020 7916 0200
> Mob: +(44) 07799403576
> [EMAIL PROTECTED]
>
>
> This e-mail and any files transmitted with it are
> intended solely for the
> addressee and are confidential. They may also be
> legally privileged.
> Copyright in them is reserved by Delphis Consulting
> PLC ["Delphis"] and they
> must not be disclosed to, or used by, anyone other
> than the addressee. If
> you have received this e-mail and any accompanying
> files in error, you may
> not copy, publish or use them in any way and you
> should delete them from
> your system and notify us immediately.E-mails are
> not secure. Delphis does
> not accept responsibility for changes to e-mails
> that occur after they have
> been sent. Any opinions expressed in this e-mail
> may be personal to the
> author and may not necessarily reflect the opinions
> of Delphis.
[EMAIL PROTECTED]
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11043&t=10997
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
