You in Europe?
-----Original Message-----
From: Uche Ishionwu [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 05, 2001 1:21 PM
To: [EMAIL PROTECTED]
Subject: RE: My BRI interface will not respond! [7:11045]
Hey Phil,
Here it is:
Cheers------>
oks#sh isdn stat bri1/0
Global ISDN Switchtype = basic-net3
ISDN BRI1/0 interface
dsl 8, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 65, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 8 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
oks#
**********************************************************************
The information contained in this message is confidential and
is intended for the addressee(s) only. If you have received
this message in error or there are any problems please notify
the originator immediately. The unauthorised use, disclosure,
copying or alteration of this message is strictly forbidden. This
message and any attachments have been scanned for viruses.
Orbiscom Ltd. will not be liable for direct, special, indirect or
consequential damages arising from alteration of the contents
of this message by a third party or as a result of any virus being
passed on.
www.Orbiscom.com
**************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11053&t=11045
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
