I don't think there is a good way to simulate token ring, exactly, but
you could set up RSRB between several routers and configure the end
points as APPN nodes. That would simulate an SRB environment without
the token ring interfaces.
Here is the link to the configs:
http://www.groupstudy.com/archives/cisco/200106/msg01146.html
Regards,
John
>>> 7/6/01 1:51:34 PM >>>
I can't find those configs? Can you help me out?
Thanks
----- Original Message -----
From: "John Neiberger"
To:
Sent: Friday, July 06, 2001 1:05 PM
Subject: Re: SNA in the lab [7:11184]
> About a month ago I posted some configs that will let you test your
RSRB
> and DLSw configs without outboard gear. You can do this by
configuring
> your routers as APPN nodes. If done correctly, you know your
configs
> are correct if your APPN sessions come up.
>
> If that suits your purposes, a quick search in the archives should
> provide the necessary configuration info.
>
> HTH,
> John
>
> >>> "Jim Franklin" 7/6/01 11:23:14 AM >>>
> What do I need to simulate an SNA over the wan environment in the
lab?
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11199&t=11184
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
