I used bridge, but it seem it's not as good as we think, since LAN is shared
over WAN.
I wonder step no 3, using forward broadcast. Do you mean something like
this.
Router (config)# enable ip forward
By the way, you said that netbios uses udp broadcast, does this means, to
browse windows will send to IP Broadcast, for example: my ehternet card
172.16.1.2/24 , then my computer will trigger udp broadcast to 172.16.1.255,
in order to browse to network neighborhood?
Rgds,
raf
----- Original Message -----
From: "Paul Elston"
To: "Rafdian Rasyid"
Sent: Monday, July 09, 2001 8:26 AM
Subject: RE: network neighborhood browsing [7:11392]
> windows netbios names use broadcasts to advertise, so there is three ways
> that I know of around this.
> 1) lmhost file. This is similar to the unix host file except it list
> netbios names to ip address.
> 2) wins server. This is similar to dns except for netbios and it allows
for
> dynamic registration.
> 3) open up your routers to forward broadcasts.
>
> There could be other methods and I would like to hear about them.
>
> Paul
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Rafdian Rasyid
> Sent: Sunday, July 08, 2001 9:26 PM
> To: [EMAIL PROTECTED]
> Subject: network neighborhood browsing [7:11392]
>
>
> Hi, all
> I have a problem. As we have 2 offices, that is connected by TCP/IP (cisco
> router 2501s), http, ftp, and telnet is OK. I wonder how to setup the 2501
> to allow Windows network neighborhood can browse remote office LAN.
>
> Many Thanks
> raf
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11398&t=11392
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
