I agree with the DHCP idea. Just don't forget to enable BOOTP forwarding or
it won't work.
As far as the migration goes, you probably just need to get a good idea of
your traffic flows and determine what the impact will be of routing it
between the VLANs.
IMHO.
Brian Wilkins
McCallum, Robert wrote:
>
> What about that good old DHCP. Has the workstation got a valid
> IP address
> for that subnet?
>
> -----Original Message-----
> From: Sean Graham [mailto:[EMAIL PROTECTED]]
> Sent: 09 July 2001 15:49
> To: [EMAIL PROTECTED]
> Subject: Migrating from routed network to VLAN network [7:11453]
>
>
> I don't know if anybody has any ideas. I am currently in the
> process of
> migrating from a routed network where a 4500 is the core to a
> VLAN network
> using a 3640, 5500 and 2900's. I am trying to make the
> migration as simple
> and painless as possible by not having to everything in one
> hit. All users
> are at the moment in VLAN1 on the same 5500 that is going to be
> segmented as
> VLAN 10 thru 60 later on.
>
> I have setup a small test so far. I have a 2900XL with an ISL
> trunk to the
> 5500 and the 3640 is ISL routing for that VLAN (20). I would
> like to be able
> to move users in small groups from VLAN1 to VLAN20 but still
> giving them
> full contectivity to VLAN1. The 3640 is sharing routes with the
> old 4500 and
> knows how to get to everything. When I put a user onto a port
> on the 2900 in
> VLAN20 it is not able to connect to anything.
>
> Any ideas...
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11631&t=11453
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
