Hi Folks,
Further to my last mail I want to pose the following scenario / question...
I have one LAN switch which is connected to 2 Cisco 2600 routers which have
E1 channelised cards
installed. Both these routers are connected back to the central site using
256K E1 Lines.
I intend to enable HSRP on the two routers to provide for high
availability and load
balancing. Each router will act as the default gateway for its own subnet
but be able
using HSRP to act as the default gateway for the other subnet should its
router fail...
Host will be spread evenly over the two subnets to provide for load
balancing...
Okay... I am fairly certain the above approach works..... But...
I am dealing with fairly small offices, and I would like to avoid having to
use two
subnets / default gateways......
Basically is there a better way I can implement this....
Your help is greatly appreciated...
Kind Regards, Peter.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11731&t=11731
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
