What does "route-map nonat" do?
ip nat pool BRASIL x.x.x.x x.x.x.x netmask 255.255.255.192
ip nat inside source list 10 pool BRASIL overload
ip nat inside source static 192.168.25.5 x.x.x.x
The "source list 10" would refer to an access-list allowing and denying
certain ips
Regards,
John
""Leonardo Borda"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello People:
>
> Actually I am using dynamic NAT to allow my intranet users access the
> internet. The problem is when a configure a static NAT from external Ip to
> the internal IP, It does not work. But the funny thing is it does not work
> only to a specific IP. Take a look at my configuration. I really do not
know
> why!!!
>
> !
> ip nat pool BRASIL netmask 255.255.255.192
> ip nat inside source route-map nonat pool BRASIL overload
> ip na
> !
>
>
> when i put that configuration it does not work!
> ip nat inside source static 192.168.25.5
>
>
> If I change this to
>
> ip nat inside source static 192.168.25.10
> It works!
>
> The default gateway is correct from theirs....
>
> thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12290&t=12287
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
