Give this a try. I have it working with USR external modems on 2610
routers--I am using dip switch settings 1 & 4 down everything else up on the
modem.
username password
chat-script backup "" "atdt \T" TIMEOUT 60 "CONNECT" \c
!
interface Serial0
physical-layer async
ip address negotiated
encapsulation ppp
dialer in-band
dialer idle-timeout 1200
dialer string
dialer-group 1
no cdp enable
ppp authentication pap
ppp pap sent-username password
ip route 0.0.0.0 0.0.0.0 Serial0
dialer-list 1 protocol ip permit
line 33
script dialer backup
modem InOut
transport input all
speed 57600
""No Data"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Im still stuggling with an async connection. Using
> Ejay's wonderful help last week Ive gotten my router
> configured but I cant seem to get the modem to dial.
> Right now I am just trying to dial into a remote
> dial-in server with ppp, pap authentication. Here is
> my config.
>
> Current configuration:
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname Router
> !
> no logging console
> !
> !
> !
> !
> !
> memory-size iomem 25
> ip subnet-zero
> !
> chat-script dial ABORT ERROR "" "AT Z" OK "ATDT \T"
> TIMEOUT 30 CONNECT
> !
> !
> !
> interface Serial0
> physical-layer async
> no ip address
> encapsulation ppp
> dialer in-band
> dialer pool-member 1
> async mode dedicated
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface FastEthernet0
> ip address 10.129.0.132 255.255.0.0
> speed auto
> !
> interface Dialer1
> ip address negotiated
> encapsulation ppp
> dialer remote-name ?
> dialer pool 1
> dialer string 18888308334
> dialer hold-queue 100
> dialer-group 1
> ppp authentication pap
> ppp pap sent-username 'name' password 'password'
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 10.129.0.1
> ip route 150.150.0.0 255.255.0.0 Dialer1
> no ip http server
> !
> dialer-list 1 protocol ip permit
> !
> line con 0
> transport input none
> line 1
> no exec
> script dialer dial
> modem InOut
> modem autoconfigure type usr_courier
> transport input all
> stopbits 1
> flowcontrol hardware
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
> Im using an external usr_courier and have the pins all
> set to defaults. Does anyone have any ideas?
>
> Ben
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12521&t=12496
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
