when u configure the dynamic nat
users will start connecting
i dont know what u done with the config
send me the config
to block some port
u need
for static mapping
static (inside,outside) 204.31.17.4 192.168.3.4 netmask 255.255.255.255
conduit permit tcp host 10.1.1.1 eq smtp any
outbound 10 permit 192.168.1.42 255.255.255.255 irc tcp
apply (INSIDE) 10 outgoing_src
SEND ME THE CONFIG
-----Original Message-----
From: Lano Kris
To: [EMAIL PROTECTED]
Sent: 7/17/01 12:54 PM
Subject: Ports with PIX Firewall [7:12605]
I configured my PIX Firewall and opened all the TCP ports, I found that
i
can ping yahoo or cisco by ip address but not with name i.e ping
cisco.com
doesn't worked, then I opened all the UDP Ports also and my Surfing
started
also I was been able to PING by name.
I just want to allow port 80 (HTTP), FTP , SMTP access to my users.
Which all Ports do I need to Open??????
DO I Need to open a port for DNS Name Resolution ?????
I am using DNS Server of ISP as I don't have resources to set-up my own
DNS.
Please Help
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12607&t=12605
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
