You're correct. It will need a DTE and a DCE cable. The part numbers
are CAB-V35MT(dte cable) and a CAB-V35-FC(dce cable).
He need to configure the clock on the interface:
config-if#clock rate 64000
----- Original Message -----
From: "Paulo Cesar Buerger"
To:
Sent: Tuesday, July 17, 2001 2:04 PM
Subject: RE: WIC to WIC Connection [7:12668]
> Acesso pelo menor prego do mercado! R$ 14,90 nos 3 primeiros
meses!
> ASSINE AGORA! http://www.bol.com.br/acessobol/
>
>
> I'm not sure if a cross cable is enough. What about the clock ? If
we have 2
> DTE cables are we able to generate the clock ? Maybe a DCE cable
(for one of
> the routers) be the best solution.
>
> > -----Mensagem original-----
> > De: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
> > Enviada em: terga-feira, 17 de julho de 2001 13:23
> > Para: [EMAIL PROTECTED]
> > Assunto: RE: WIC to WIC Connection [7:12668]
> >
> >
> > get a cross over cable from ebay.com
> >
> > -----Original Message-----
> > From: Chris Headings [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, July 17, 2001 8:05 PM
> > To: [EMAIL PROTECTED]
> > Subject: WIC to WIC Connection [7:12668]
> >
> >
> > Hello all....setting up a small lab w/2 2621's. Would like
> > to create a
> > "WAN" cable to be able to bring up a serial connection
> > between routers. Is
> > it possible and if so, what is the pin-out's to custom create
it....
> >
> > Thx
> >
> > Chris
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12688&t=12668
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
