I expect the total load on your 2 active calls is above 40% so the
router is trying to activate a third channel. Obviously you don't
have 3 channels with a BRI so you get this error message.
Do you have another BRI interface in the same dialer
pool/rotary-group that is not shutdown? If you do and the second BRI
is not connected to anything then that would explain this behavour.
If not, then I thought the router would be smarter than that - it
should know that there are only 2 channels for each BRI.
HTH
Charlie
--- "[EMAIL PROTECTED]" wrote: > Hi
everybody, I have 2 routers connected using ISDN line.Router A
> dials out
> to Router B in multilink mode wherein the 2nd call gets generated
> when the
> traffic reaches 40%
> dialer load-threshold 100 outbound
> Using command sh isdn active ,I can see 2 calls generated on 2 B-
> channels
> but at the same time I am getting messages like this continiously
> when I
> am putting terminal monitor on.
>
>
> 0:36:10: ISDN BRI1/0: isdn_is_bchannel_available: No Free
> B-channels
> 0:36:12: ISDN BRI1/0: isdn_is_bchannel_available: No Free
> B-channels
> 0:36:14: ISDN BRI1/0: isdn_is_bchannel_available: No Free
> B-channels
> 0:36:16: ISDN BRI1/0: isdn_is_bchannel_available: No Free
> B-channels
>
>
>
> Can anyboby explain what this message indicates?
> Also somestime the calls are not initiated on router A end ,what
> could be
> the reason ?
>
>
> Regards
> Bware
[EMAIL PROTECTED]
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12779&t=12775
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
