make sure you don thave the command 'no keepalive' in the interface which is affected "Hire, Ejay" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Based on what I'm seeing, I think there is a problem with the data returning > from the telco cloud. Can you loopback the CSU/DSU and see if your RX > counter increments? If yes, Then switch the cable from the csu/dsu to the > smartjack. Un=loop and test. If it still doesn't work, Loopback the > smartjack and see if you can see the loopback remotely. If you can't, call > the Loop Provider, there is a problem with the loop. > > -ejh > > -----Original Message----- > From: Andrew Larkins [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, July 18, 2001 6:06 AM > To: [EMAIL PROTECTED] > Subject: WAN link funnies - UP UP but no comms- on same subnet!!! > [7:12774] > > > HI all, > > Strange problem here. > > The serial interface are UP UP on both sides, but we are not able to ping > each other - even though directly connected. A "debug ip ICMP" on the > remote site shows the ping coming through and replying, but the reply never > gets back. > Also the remote site saw my router using CDP, but I do not see him. > > Any ideas?? > > I believe this is Telco related, but the line shows clean from the interface > stats > > Andrew Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12928&t=12928 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
