ARe you using IOS ver 11.2 ?
see this link
http://www.cisco.com/warp/public/770/fa112-arp_eigrp.shtml
clear the arp table and configure a static arp entry and see if that works ?
Let me know what works eventually ?
Jaspreet
Chris Headings wrote:
> I have a weird one....we have a client that is connected to us via
> ethernet. We have a 7513 on our side and they have a 2621. They are
> receving a LOT of arp input, so much in fact that their router is maxed out
> at 100%. The sh proc cpu shows arp input as the culprit....
>
> When you do a sh arp, they only entry that should be in their 2621 is our
> 7513 with the proper IP and MAC combo....but instead the arp table (in the
> clients 2621) goes on forever and shows random IP's associated with the MAC
> of our 7513 FA....
>
> Any help would be greatly appreciated.....
>
> Thx
>
> Chris
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13010&t=13003
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
