You're going to learn how to use CCO (Cisco Connection Online). When you
have the router started, check the firmware level (the boot rom version).
The firmware level determines which modules are valid. Then, at
www.cisco.com do a search on 2610 Release Notes, and then within the Release
Notes look at the 2610 firmware versions and what hardware they support.
You will probably need to upgrade the IOS that is on the router (if it's
11.3, you might need to find which IOS version first supported your new
WICs)
-e-
----- Original Message -----
From: chris klebl
To:
Sent: Thursday, July 19, 2001 8:10 PM
Subject: Q about configuring new WIC's [7:13051]
> i have recently gotten 3 2610's off eBay and have also gotten some
> additional WIC's.
> i am having the hardest time getting the router to recognize the new
> cards. when i do sh int it actually shows cards that are no longer
present
> that the old owner had installed but it does not show the new cards that i
> put in. can't find the answer to this question anywhere.
>
> please help
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13064&t=13051
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
