Check this out: http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121 t/sem121t.htm Error Message %AMDP2_FE-6-EXCESSCOLL: [chars] TDR=[dec], TRC=[dec], MSGDEF_LIMIT_SLOW Explanation Ethernet or Fast Ethernet is experiencing multiple collisions. This condition may occur under heavy traffic loads. Recommended Action The system should recover. No action is required. HTH MikeN ""Leonardo Borda"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Does anybody already have that message in your routers? > > 5w5d: %AMDP2_FE-5-EXCESSCOLL: Ethernet0/0 TDR=9, TRC=0 > > It4s strange because I have a Cisco 2600 and I have no many workstations > connected to it... > If anybody had the same problem and found an answer please.... > > Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13122&t=12994 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
