Hello -
yes - both T3s will be active at the same time. im assuming that the
routers will pick the best path to any destination... later on when i figure
out policy maping maybe i will tweak things if there is a need.
thanks for the tip on the no synchronization command. i was having going
nuts with ibgp... basically router 2 (see the config i sent previously) was
getting all the bgp routes from timewarner and it was sending them to router
1.
i confirmed this by "sh ip bpg neighbor x.x.x.x adv".
But router 1 was not showing any of the routes....
Out of frustration i decided to put in a bgp confederation (aka AS NAT)and
everything started working....
t.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13196&t=13110
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
