u need to put your serial no
and u ll get a new key
u need cco login
-----Original Message-----
From: Jacques Allison [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 5:24 PM
To: [EMAIL PROTECTED]
Subject: PIX activation key on 4.1(6) [7:13187]
Hi all,
On PIX ver 4.1(7) I can use the "show actkey" to display the connection
license key, but the command is not on the ver 4.1.(6). How do I upgrade the
PIX is I lost the original disk and license? I look on CCO and can't find
any answers.
Regards,
Jacques Allison
Senior Network Engineer
Tel: (+27) 012 349 2030 ext.: 210
Fax: (+27) 012 349 1015
Mobile: (+27) 083 327 4941
[EMAIL PROTECTED]
http://www.geocities.com/jacquesa_2000/index.html
+Security
[demime removed a uuencoded section named clip_image002.jpg which was 29
lines]
[demime removed a uuencoded section named clip_image004.jpg which was 30
lines]
[demime removed a uuencoded section named clip_image006.jpg which was 40
lines]
[demime removed a uuencoded section named clip_image008.jpg which was 31
lines]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13192&t=13187
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
