Hi I have x25 router configured at my office .It has two serial ports coming from lets say source......... the ports being as ser1/1 and ser2/1 and from this router 2 ports each are connected to two machines working in redundancy.It like this Source ports: ser1/1,ser2/1--X25 Address 010102 for ser1/1 Machine1:ser1/3,ser2/3---------X25 addresses 010104,010105 Machine2:ser2/0,ser2/2---------X25 addresses 010104,010105 Out of these two machines only one will be active at a time .I have the routes configured here as follows.The problem is these machines work fine and switch from machine 1 to 2 is ok but if we reset the source then we loose connectivity between the ser2/3 if machine 1 is active .Is the route settings wrong .------------as configured below.Pls help onthis 1 dest 010101 Serial1/0 2 dest 010102 Serial1/1 3 dest 010103 Serial1/2 4 dest 010104 Serial1/3 5 dest 010301 xot 3.254.254.125 6 dest 010302 xot 3.254.254.125 7 dest 010303 xot 3.254.254.125 8 dest 10000012* Serial1/1 9 dest 10000032* Serial1/0 10 dest 010104 Serial2/0 11 dest 010105 Serial2/3 12 dest 010105 Serial2/2 Regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13340&t=13340 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
