type of switch? 5500 use straight thru cable; however,
and 6000 use that one and roll over, but you must push
the botton to use either straight or roll over.
> If you cable works with the other switches, you can try to change the flow
> control to NONE instead of HARDWARE. Most of the Cisco devices I have
worked
> with will accept HARDWARE flow control, but some few will not.
>
> If that does not work, I would suggest that you connect the new switch with
> one of the other switches with a CAT5 cable (crossed over) and then connect
> the the other switch and do a show cdp nei, and then telnet into it from
the
> switch you're connected to.
>
> Hth,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> http://www.RouterChief.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> -----Original Message-----
> From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, July 22, 2001 10:04 PM
> To: [EMAIL PROTECTED]
> Subject: weird switch! can't config thru console [7:13302]
>
>
> Hi.
>
> I tried to config a 2900 switches thru its console but it has no output at
> all on the hyperterminal screen. I am sure my setting is correct.
(9600-N-1
> none) as I can get output on other switches with the same setting. May I
> know what is wrong with the switch? Any method to solve this
>
> Tong
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13367&t=13302
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
