Oops, my bad. I got in a hurry when I was posting this. Here is what it
looks like. Sorry about that.
dial-peer voice 5000 vofr
destination-pattern 5000
session target serial0/0 120
dial-peer voice 101 pots
port 1/0/1
destination-pattern 1001
Matt
""Tony Medeiros"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am suprised that the IOS let you put a "port statment" under a VOFR dial
> peer. Those are only for POTS peers. Take it out and it might work.
> Tony M.
> #6172
>
> ----- Original Message -----
> From: Matt
> To:
> Sent: Monday, July 23, 2001 5:05 PM
> Subject: VoFR [7:13434]
>
>
> > Hey, I am having trouble with VoFR. I have a small lab setup with a
2600
> as
> > a frame switch and two routers (2600 and 3600) with FXS ports. I can
get
> > VoIP to work just fine. For VoFR I changed the dial-peer to VoFR and I
> > changed the destination pattern to use the serial interface and the
local
> > DLCI. Other than that the configs are the same (just a plain Jane VoIP
> > config). Is there something obvious that I am missing?
> >
> > dial-peer voice 100 vofr
> > port 1/0/0
> > destination-pattern 5000
> > session target serial0/0 120
> >
> > Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13440&t=13434
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
