Yes, it dials and handshakes but never initiates the ppp negotiation. The lights on both modems indicate a good connection, but then the connection just times out. Ben --- Farhan Ahmed wrote: > try this > telnet 192.168.1.201 20(yourline#) > at > OK atdtXXXXX mobile > > is it dialing? > > -----Original Message----- > From: No Data [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, July 24, 2001 11:35 PM > To: [EMAIL PROTECTED] > Subject: last modem question ever (I can only hope) > [7:13586] > > > Right now im trying to use 2 async lines as a back > up > for a 56k frame circuit. At this point im not even > concerned about the backup part I just want to get > the > two routers talking to each other. Ive got the > modem > I want to dial to dial but then nothing really > happens. here are the debugs on the modem it is > dialing. > > Router#show debug > General OS: > Modem control/process activation debugging is on > PPP: > PPP protocol negotiation debugging is on > Router# > 02:02:13: TTY3: DSR came up > 02:02:13: tty3: Modem: IDLE->READY > 02:02:56: TTY3: DSR was dropped > 02:02:56: tty3: Modem: READY->HANGUP > 02:02:57: TTY3: dropping DTR, hanging up > 02:02:57: tty3: Modem: HANGUP->IDLE > 02:03:02: TTY3: restoring DTR > > It looks to me like it connects (both from the debug > and the pretty lights on the modems themselves) but > that ppp negotiation does not start. Hardwarewise > Ive > got a 3640 with a wic-2a/s and a 1720 with a > wic-2a/s > attached to v.34 usr courier modems. Here is the > relevent parts of the config from the router that is > dialing out. > > ! > version 12.2 > no service single-slot-reload-enable > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname PHX_Router > ! > ! > username dialto password 0 password > username dialfrom password 0 password > ip subnet-zero > ! > isdn voice-call-failure 0 > chat-script dialout ABORT ERROR "" "AT&F&C1&D2" OK > "ATDT \T" TIMEOUT 60 \c > call rsvp-sync > ! > ! > interface Serial2/0 > physical-layer async > no ip address > encapsulation ppp > dialer in-band > dialer pool-member 2 > async mode dedicated > ! > interface Serial2/1 > physical-layer async > no ip address > ! > interface Dialer2 > ip address 10.145.1.2 255.255.255.0 > encapsulation ppp > dialer pool 2 > dialer remote-name dialto > dialer string 2546593 > dialer hold-queue 100 > dialer-group 2 > pulse-time 0 > ppp authentication chap > ! > ip classless > ip route 192.168.1.0 255.255.255.0 Dialer2 > no ip http server > ! > dialer-list 2 protocol ip permit > ! > ! > ! > ! > ! > ! > dial-peer cor custom > ! > ! > ! > ! > line con 0 > exec-timeout 0 0 > transport input none > line 65 66 > no exec > script dialer dialout > modem InOut > modem autoconfigure type usr_courier > transport input all > stopbits 1 > speed 115200 > line aux 0 > line vty 0 4 > password password > login > ! > end > > > and here is the config from the modem it is dialing > into. > > version 12.1 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname Router > ! > ! > username dialto password 0 password > username dialfrom password 0 password > ! > ! > ! > ! > memory-size iomem 25 > ip subnet-zero > no ip domain-lookup > ! > chat-script dial ABORT ERROR "" "AT&F&C1&D2" OK > "ATDT > \T" TIMEOUT 60 \c > chat-script resetusr "" > "at&fs0=1e0&r2&d2&c1&b1&h1&m4&k1q0&w" "OK" > ! > ! > ! > interface Loopback0 > ip address 192.168.1.1 255.255.255.255 > ! > interface Serial0 > no ip address > ! > interface Serial1 > physical-layer async > no ip address > encapsulation ppp > dialer in-band > dialer map ip 10.145.1.2 name Phx_Router broadcast > dialer-group 1 > async mode dedicated > ppp authentication chap > ! > interface Serial2 > physical-layer async > no ip address > ! > interface FastEthernet0 > ip address 10.129.0.132 255.255.0.0 > speed auto > ! > ip classless > ip route 0.0.0.0 0.0.0.0 Serial1 > no ip http server > ! > dialer-list 1 protocol ip permit > ! > line con 0 > transport input none > line 2 3 > no exec > script dialer dial > script reset resetusr > modem InOut > transport input all > stopbits 1 > speed 115200 > line aux 0 > line vty 0 4 > === message truncated === __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13593&t=13586 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
